Ford Debutes F150 At SEMA

Posted on Leave a commentPosted in 4X4's, Discovery, Landrover Club, LR2 / LR3 Rovers, Performance / Wheeling, Range Rover

With the worlds largest OEM automotive show just finishing up we have seen a lot of hype coming from the well known automotive manufacturer Ford. They continues to be focusing first of all on its trucks and crossovers. We have already seen previews of the items it’s available for that Edge and Explorer. The Blue Oblong car maker is giving us an idea of the slew of seven personalized F-150 pick-ups it’s planning for that Las Vegas tuner expo.

Towards the top of their email list is really brand new 2016 ford F150 that is using the EcoSport engine and a six-speed manual transmission. The Wheel Company ESR wheels has provided a complete work over and donated a set of ESR sr02 wheels the company has also spent a lot of time flashing the computer of the car and installing a turbo to generate some positive boost pressure.

Another Company spent time really styling the vehicle after the raptors livery setup and did a completely custom paint job! End of Story almost every vehicle at this automotive show had its own level of unique styling! This new vehicle is not to wrecked with and is going to be paving the way for modern manual trucks.


Land Rover Defender Sells for over half million at Auction?

Posted on Leave a commentPosted in 4X4's, Exotic Vehicles, Landrover Club, LR2 / LR3 Rovers, Performance / Wheeling

Range Rovers, Landrovers all seem to be sky rocketing in price in the last couple years but over half a million dollars pricey? This might seem a little bold even to the collector in our oppinion it appears just like a lot – which is – particularly when the automobile under consideration is really stripped out and low in features

That’s 17 occasions exactly what a entry level model Defender cost or what did it cost new within the United kingdom, or three occasions what it really charges for that new Range-Rover Autobiography model here in america. It is also the greatest cost ever taken care of a Land-Rover, based on both manufacturer and also the auction records at Sports Vehicle Market. The prior high-water mark was recorded by this past year by Silverstone Auctions, which offered a restored 1970 Range Rover in the Salon Privé working in london for £132,250 ($217k at that time or under $200k today).

Fortunately it’s all regulated seeing a great place – or two great places, really. The auction tips both Worldwide Federation of Red-colored Mix and Red-colored Crescent Communities and also the Born Free Foundation. The previous has reserved its area for nothing short of disaster and evacuation mission’s in Nepal, as the latter really concentratee towards wildlife preservation in Africa.

Land Rover first hit the scene in 1948 using the 1 series model, that was then the Series 2 and (you suspected it) Series 3. Initially known as the 90 and something Ten (according its approximate wheelbase measures in inches), your opponent showed up in 1983 and has been around production since. It’ll finish its production run the following month, however, when preparing for the appearance of an exciting-new model.




Changing Racing Wheels On your Car

Posted on Leave a commentPosted in 4X4's, Discovery, Landrover Club, LR2 / LR3 Rovers, Performance / Wheeling, Range Rover

Do you have a problem changing your alloy esr racing wheels? The trick is so simple. You can always change your wheels within a very short time and continue with the race. Here is how.
Park the car safely. This is to make sure that you do not block other cars that are still in the race. This also avoids any accidents that may occur. The vehicle should also be on a level ground for balance. The hazard lights are also important.
Get the jack and the spare wheel. Put the jack near the wheel that you want to replace and make sure it holds firmly onto the ground then remove the wheel.
Fix the spare wheel and fasten the nuts in place using your hands. Use the spanner when they can rotate no more. Tighten the remaining bit as tight as you can. Remove the jack and put it back and your alloy racing wheel will be good to go again.



Cross Country Specifications

Posted on Leave a commentPosted in 4X4's, Discovery

F.1.1.   All vehicles must be fitted with an ALRC approved roll-cage.  See separate regulation set for details.

F.2.         SEATS & SEAT BELTS.
F.2.1.   Minimum of a lap belt to be worn by all occupants whilst on a section.
F.2.2.   All seat components must be securely attached regardless of original design.

F.3.         WHEELS & TYRES
F.3.1.      Minimum tyre pressure is 12 psi.
F.3.2.      Spare wheels and tyres need not be carried. (See MSA Yearbook 2006 H.36.7.2.)

F.4.1.     All competing vehicles must carry a fire extinguisher, minimum 1¾ litre AFFF or equivalent extinguishant / weight as specified in the
MSA Yearbook 2006, within reach of, or operable from the driver’s seat.


BC Racing Suspension for Landrovers

Posted on Leave a commentPosted in 4X4's, Discovery, Landrover Club, LR2 / LR3 Rovers, Performance / Wheeling, Range Rover

We often get asked about additional methods of enhancing the performance of your racing bcracing coilovers, well when you ask Canada, we deliver! There are of course a variety of ways to maximize what you’re getting out of your bc racing coilovers and dependant on who you ask the answer will invariably differ, so here’s a couple of our personal favourites:
Rolled fenders – This may not be the most obvious however it addresses the all too common issue of wheel rub. Of course the built in adjustability on some bc coilovers will address this issue but why should you have to compromise on an otherwise perfect setup?
Camber Kits – The inclusion of a camber kit will correct the alignment of the wheel, leading to efficient, even tyre wear, an increased level of grip and subsequently better handling.
There’s so many small details and intricacies involved in achieving that all important ‘perfect setup’ that to say the above is all there is to it, would be doing our range of bc racing suspension a great disservice. If you do have any questions though, our qualified staff are always on hand to ensure your ride is always at its best.


Modified Class Requirements 4×4

Posted on Leave a commentPosted in 4X4's, Landrover Club, Range Rover
The following changes from the Standard Class Regulations are permitted in this class:-When optimising a road-legal vehicle for off-road use, owners may need to take advice on the suitability of any alterations to establish that they are not detrimental to safety for public road use, and that the terms of the vehicle’s insurance are not contravened.C.1.   VEHICLE DIMENSIONS
C.1.1. All dimensions given in the Vehicle Sizes Chart shall apply.

C.2.     STEERING.
C.2.1.   Power steering may be fitted to any model, using parts from any other product listed in A.2. Points of attachment may be strengthened where necessary.

C.3.     ENGINES.
C.3.1.   Any Land Rover or Rover car engines (and others with Rover part numbers) up to a Max of 4600cc may be used complete with their ancillaries subject to A2.
C.3.2.    Carburetors may be changed; air intake system and manifolds may be altered to any specification.
C.3.3.   Engine location and orientation is free on condition that the forward facing part of any engine block (the main cast structure and not ancillary equipment / bolted-on parts) shall be forward of the midpoint of the wheelbase of the vehicle.
C.3.4.      Forced induction petrol engines are not permitted.

C.4.1.      The transmission type and its location are free, provided the transmission consists of parts that have Land Rover / Rover part numbers or equivalent cross-references.

C.5.1.      Any Land Rover suspension system and components may be used on any model and the suspension mounts modified to accommodate the components, the use of air suspension is prohibited except in classes and periods where fitted as original equipment.
C.5.2.      Any axle types may be used (provided they have Land Rover part numbers or equivalent cross-references).
C.5.3.      Coil assisters (where the coil is separate from the shock absorber / damper) may be fitted to a leaf-spring vehicle. The suspension system shall then be deemed to be a coil-spring type and not a leaf-spring type.
C.5.4.      Bump-stops must be fitted in the appropriate location and must be complete factory-specification items that match either the chassis or axles in use.

C.6.       DAMPERS.
C.6.1.      Additional dampers may be fitted.

C.7.         BRAKES.
C.7.1.      Any type of braking system may be used except fiddle brakes.
C.7.2.      Bias braking (front to rear) is permitted but the ability to alter the settings from the driver / passenger compartment, or whilst the vehicle is being driven, is prohibited.

C.8.     CHASSIS

C.8.1.   The chassis may be modified from one or more original Land Rover chassis or one(s) of Land Rover design maintaining a chassis rail separation of Land Rover Ltd design specification. The profile and rectangular cross section above and between the axles must remain as the original.  All welding on the chassis must be of a high standard.

C.8.2.   Rail, space-frame or monocoque chassis construction may be used where factory fitted to that model.

C.9.1.     The radiator may be fitted in any suitable location within the confines of the original silhouette. Coolant hoses and pipework may be re-routed but must be separated from the driver / passenger compartment by means of lagging (if metal pipework) and a solid metal cover (if rubber pipework) to protect all persons including marshals and spectators.
C.9.2.     All pipework, header tanks etc. shall be covered to protect occupants, marshals and spectators should any part of the cooling system fail and cause water or steam to escape.
C.9.3.     The radiator shall be shielded from the driver / passenger compartment regardless of its location. Louvre vents are acceptable as radiator shielding.
C.9.4.     The cooling fan(s) must be protected by a grille, Louvre or similar.

C.10.       FUEL TANKS.
C.10.1.    Fuel tanks may be changed or repositioned but must be securely fixed in place and be of metal construction. Plastic or composite fuel tanks are permitted only where they are factory fitted to that model and mounted in the original position.
C.10.2.    If non-standard fuel filler is used, it must have a leak-proof cap, and be isolated from the driver / passenger compartment by the best possible method commensurate with the vehicle design. Under-seat lids shall be screwed down with a gasket. The very minimum protection for an early under-seat filler is the cap separately sealed. The fuel filler cap must be located in a safe place. Fuel tank air vents must be at least 25cm to the rear of the cockpit and must be designed to prevent the escape of fuel should the vehicle be inverted. It is recommended that a non-return valve is incorporated in the vent system. (See MSA Yearbook 2006 reg Q.6.)

C.11.       BUMPERS
C.11.1.    Heavy duty bumpers, and bumpers associated with winch installations are permitted on condition they are no smaller or weaker than the originals.  See Logbook article Dimensions Chart for bumper widths. (Rules B.12.2 and B.12.3 do not apply in Modified vehicles)

C.12.       SILHOUETTE.
Definition:- The “body capping line” on a “Series” Land Rover or Defender is defined as a horizontal line level with the top edge of the
fixed rear load area surround. The “window line” on Saloon / Station Wagon types is level with the bottom edge of the driver’s door
C.12.1.    The body parts above the “body capping line” or “window-line” (as defined above) may be removed.
C.12.2.    The silhouette (as viewed from the side and front) of the bodywork below the “body capping line” or “window line” (as applicable) must be retained. The chassis, fuel tank etc. are not considered to be part of the silhouette.
C.12.3.    Sill panels may be removed and wings cut away, provided they present no sharp edges. Inner faces of the wings (those either side and forward of the radiator panel on a Series Land Rover) shall remain leaving the silhouette of the body unaltered.
C.12.4.    Bodywork may be replaced with non-Rover items on condition that all other shape / dimension specifications above are adhered to




Road Taxed Vehicle (RTV) Trial – Specific Technical Regulations
E.1.     BODYWORKRule C.12. states which part(s) of the bodywork may be removed. However, in this class, the following applies:-E.1.1.  All vehicles must be in one of the following two configurations:-
E.1.1.1.   Soft-top vehicles – must have the manufacturer’s windscreen raised, and complete manufacturer’s hood and support structure in place. The rear flap on the tilt may be secured open.
E.1.1.2.   Hardtop vehicles must have the whole of the manufacturer’s hardtop or truck cab with all fastenings secured and all glass in position.

E.1.2.      Door tops must be in place complete with all glazing panels in place.
E.1.3.      The tailgate must be in place and secured closed.

E.2.         TYRES & WHEELS
E.2.1.   Vehicles must be entered on their normal road tyres which must be UK road legal for the vehicle on which they are fitted.
E.2.2.   Aluminium wheels and matching nuts may be used in place of factory-fitted steel wheels where suitable hubs are fitted. (See Scrutineering Guide in the ALRC Handbook for details on identification of suitable hubs.)
E.2.3.   Minimum tyre pressure to be 22 psi.
E.2.4.      Spare wheels and tyres need not be carried. (See MSA Yearbook 2006 H.36.7.2.)

E.3.         SEATS & SEAT BELTS.
E.3.1.   Seat backs and squabs must be secured to the vehicle structure at least as securely as originally manufactured unless originally manufactured with no securing devices.
E.3.2.   Vehicles must have a minimum of lap and diagonal seat belts fitted and worn by both driver and passenger. This is to apply even if the vehicle does not require seat belts for use on the public road. A properly fitted 3-point (or better) safety harness is an acceptable replacement for the standard seat belt. Lap belts only are required on Series vehicles up to 1965.

E.4.1.   It is recommended that all competing vehicles carry a fire extinguisher, minimum 1.75 litre AFFF or equivalent extinguishant / weight as specified in the MSA yearbook, operable or accessible from the driver’s seat.

E.5.         FUEL TANKS
E.5.1.   Where the fuel tank and filling system are unaltered from the original design, a standard filler cap may be used unless event SRs state otherwise. See also rule C.10.2.


Rod’s Trailer for Sale

Posted on Leave a commentPosted in 4X4's, Landrover Club, LR2 / LR3 Rovers, Performance / Wheeling


Please contact the seller directly.
All matters relating to the purchase of items from this web site are to be dealt with directly with the seller.

Only contact the Club for club supplied items (..where contact is club!).

Club Shop – Audrey Retallack – 01566 781446 £0.00
The club shop carries a wide variety of Cornwall & Devon LRC Merchandise. To name but a few:
C&D Sweatshirts – Various colours and sizes – £16.00
C&D Polo shirts – Various colours and sizes – £12.50
Baseball Caps – Various colours One Size – £4.75

Please contact Audrey to view full range and place order. Please remember do not approach Audrey whist competing, please discuss your requirement before or after an event. You have been warned she does bite.

Contact:Audrey Retallack – 01566 781446
“For Sale” Range Rover Vogue 3.9efi auto breaking for spares £0.00
Range Rover Vogue 3.9efi auto breaking for spares. Everything available except axles, steering and engine, although i may be tempted to sell the engine…


Contact:Contact Ian on 07771 882622.
“For Sale” P5 power steering box £100.00
Rover P5 power steering box. Good working order. £100. Can bring to event if that helps.
Contact:Contact Ian on 07771 882622
Contact:Contact: CHRIS LEGG 01822 834446 / 07802 415919
Breaking 3.9 Range Rover – H Reg £0.00
3.9 H Reg Range Rover full sports stainless steel exhaust, clean panels and parts. Please call Dave Browne for parts enquiries and prices.
Contact:Dave Browne – 07774 167434 or 01752 407900
Aluminum Chequerplate Sheets £65.00
For sale. Aluminum Chequerplate Sheets. New. 8 foot by 4 foot. 2.5mm thick. Ideal for Land Rover floors, Rear Tubs, Trans Tunnels, also ideal for trailers, lorries, etc. Can deliver to events. ₤65.00 each. Discount on 4 or more. Call Ian Williams on 07771 882622 for more info.
Contact:Ian Williams on 07771 882622
Class 9, 80in trialer £4,000.00
For Sale.
Class 9, 80in trialer. QT frame/roll cage,
4 pin diffs front & rear.
24 spline heavy duty shafts front and rear.
110 front CV’s & swivels.
New poly bushes (soft yellow type).
New starter motor.
This is a very reliable and competitive Land Rover that has won
many events in the last 5 years inc the Majors, The Mendips,
and many club CCV’s. And it’s ready to use straight away.
I’m only selling it because I have a new trialer.
£4000 (can be cheaper if diffs ect are not wanted)
Phone Mike Smerdon for more details, 01626 354855 or 07889 988200
Contact:Mike Smerdon for more details, 01626 354855 or 07889 988200